Ok, see you again soon. we will continue with the previous tutorial. i.e. making internet cafes. and our previous tutorial … are continuing the tutorial on making a 3D CPU huh. so we will continue with the previous tutorial. we go to edit mode first !! enter edit mode !! then we will add the ports on the CPU. the first one we will add .. VGA port first. we make the line, press “Ctrl + R”, then we adjust the position here !! then we make another line here !! ok. we enter vertex face, then we select this one !! if we press the shortcut … “E” or extrude, go outside !! will be like this. ok, then we enter the vertex edge !! then we select the side !! here we will make the VGA port become more rounded huh. if you already press .. press “Ctrl + B” !! well like this. ok. we can see, he will become more rounded. To make it even more rounded, we select the edges again !! then we press “Ctrl + B” again !! briefly !! “Ctrl + B” !! well like this. it will become more rounded. then if so, we make a line inside this object !! inside this VGA port before that we enter the vertex face first !! we select this, then we slide !! middle of it !! enter the vertex edge, we select this one, then we widen it !! one more we widen too !! well, like this. we make the line again !! sorry, let’s expand first !! the vertex will change like this later, so it’s not organized. we delete the edex vertex !! this irregular. well if you have, we do one more too !! we remove the energy !! briefly !! then we will select this one !! and press the “F” shortcut or face !! then he will make … then he will make a new face huh. briefly !! face selection. well, like this. do the same thing at the top too !! well ok. here we make the line again here before that, we enter vertex face !! first remove the line or cancel it !! vertex selection facenya !! then press the “E” shortcut or extrude !! then press the “S” shortcut or scale in !! ok. if so, we press the “E” shortcut or extrude to the outside !! it will look like this. let’s make it here again !! make another line out !! then we select … before that we enter vertex face again, then this selection !! then press the “E” shortcut or extrude to the outside !! we must set the same height. well ok. to make it more rounded. we enter vertex edge !! then we select the edges !! the edges !! press the shortcut “Ctrl + B” !! well ok, like this. then he will be more rounded. then we enter the vertex face !! we select this one, then we press the shortcut … “E” or extrude, then we press the “S” shortcut again or scale it in !! E. E. S. we usually select one by one yes. E, S. will be like this. and we push in !! briefly we repeat, press the shortcut “E” or extrude !! then press the “S” or scale !! shortcut then press the “E” shortcut or extrude again in !! well, do the same thing !! so like this, let’s render !! briefly !! so it looks like this. we make so … we make the USB port here !! here. this part here !! we make the USB port Hmmm.. well we just made it here the USB port !! enter the vertex face !! we selection, press the “E” shortcut or extrude !! just a little!! then press the “S” or scale shortcut before that, if you’ve already pressed the “E” shortcut … we press the “E” shortcut again !! then press the “S” shortcut !! then press the “E” shortuct again to go inside !! well like this. ok. we make a line !! we make the garages. here, then enter the vertex face again !! inner selection. then press the “E” shortcut or extrude to the outside !! then press the “S” or scale !! shortcut like this. ok. we make the line again !! here, just small !! we made the USB port again !! (I mean to make 2 lines) !! “Ctrl + R” !! (just mean 2 lines). wait a minute, this is too tilted. (I mean 2 lines). ok, we entered vertex face, we selected this !! oh we are one by one, press the “E” shortcut or extrude to the outside !! then we scale !! push it aside a little !! ok, do the same thing. try to be the same !! we make this as … hmm .. iron yes. as iron, which is on the USB port. ah, try it. so this is the result. we make the port again !! like this, in the same way, ok. do the same thing as before !! we select, then we put aside !! ok. has become the USB port. ok. ok, that’s all the tutorial this time. hopefully useful, thanks 🙂

Tutorial Blender 3D – Membuat Warnet || (7) Membuat CPU 3D Part 3

2 thoughts on “Tutorial Blender 3D – Membuat Warnet || (7) Membuat CPU 3D Part 3

  • February 13, 2020 at 8:17 am
    Permalink

    mantap mir. tetap semangat

    Reply
  • February 13, 2020 at 8:23 am
    Permalink

    Bang bisa buat skin untuk gta ga ?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *