Hi, I’m Jon on behalf of Expert Village. In
this video clip we’ll installing our electrical box. Now the way that these electrical boxes
work when you place them in the hole that you cut out, You’ll tighten these 2 screws
and these little wings will fly out and they will pull the wing against the wood and against
your box. It will pull it together and it will hold it very securely. To put it in place
we’ve cut our hole and we trimmed it, you can go ahead and slip that in there. If it’s
a little bit to tight in some areas, then you might want to go back and trim it a little
more. So I went ahead and press that in made sure it was down all the way you’ll notice
these little flanges on the side, in the corners it will help hold it in. Take a screw driver
and screw the screw in so those wings will fly out and pull that tight, go ahead and
do that with the other one. This is going to keep that from moving at all. Next you
want to install your face plate right on top. Once that is installed you have a nice finished
appearance now keep in mind we are going to have to remove all of this before we stain
and finish our project.

How to Design & Build a Computer Desk : Installing Electrical Box for a Computer Desk
Tagged on:                                                 

One thought on “How to Design & Build a Computer Desk : Installing Electrical Box for a Computer Desk

  • September 2, 2014 at 5:51 pm
    Permalink

    lol that hole tho xD sick work right there

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *