Excuse me,
is this where the case magic happens? I’ve been expecting you.
Welcome to the room, where genius is born. Lighting genius, and so we’re gonna take
this lovely boring system of yours and turn it into an RGB masterpiece. I like
that, watch and learn. All right good people, so I’m Dimitri
from Hard Rock Canucks, teaming up with CORSAIR and today let’s discuss all the
proper ways you can elevate your lighting game, inside the case or perhaps
outside, super simple stuff by the way and control everything from iCUE software. And the learning begins, with the LIGHTING NODE PRO which is a digital RGB
lighting controller. It’s a simple and the most effective method for interior
or exterior illumination. You can hide the magnetic strip along any side of
your case. This bottom mount is quite nice as it
hides the RGB strip it delivers a beautiful ambient spill. And a more
permanent hold is available thanks to the included full sided tape, which by
the way can be used to illuminate your desk space instead. Also the hub, is super
tiny and easy to hide and route and supports up to four lighting strips so
you can arrange to light a little or to light everything. So now let me show you
how this entire LIGHTING NODE PRO eco system works. So each hub has two LED
channels so you can connect all four strips into one channel, or separate them
into two, or if you have the CORSAIR RGB FANS with an RGB LED hub you can route
the fan lighting into one of the channels on the NODE PRO. The hub then
gets powered via SATA connection on your power supply and is connected to the USB
port on the motherboard for that iCUE control. Now let me tell you blasting
your components with light is one thing, but cooling them with these beautiful
RGB fans is a whole other level of illumination craftsmanship.
Let me explain, so take these ML RGB fans for example, transparent blades that
properly consume that center light, for a gorgeous showcase. They spill just enough
light onto other hardware for that subtle but tasteful effect, plus they
cool incredibly well I always say that a few RGB fans will revive any build as
soon as the blades start to spin so you don’t have to feel any guilt. And for
something a little extra special the LL RGB pack lights up the entire frame for
even more lighting beautification because you always got to show the
hardware that appreciation element, through RGB, of course. But
let’s not forget it’s full control you’re after so when you leave this room
you’re gonna have a new COMMANDER, the COMMANDER PRO. So this thing is a
digital lighting and fan controller, or basically an all-in-one hub, that makes
your life super simple, with a full RPM control for six fans, dual motherboard
USB 2.0 pass-throughs and LIGHTING NODES for connectivity. The COMMANDER PRO eco
system is awesome, because it’s so modular. So once you connect the fans for
RPM control, the RGB LED hub from the fans connects into one of the LED
channels, while the other channel can be used for LED strips for example and the
USB 2.0 pass-throughs are awesome for all-in-one coolers for the CORSAIR
power supplies and we even get four temperature nodes, with each COMMANDER
PRO. That gives you flexibility for temperature monitoring. The PRO is then
connected to the motherboard for iCUE control and to the power supply for
power and now you’re ready for your own custom lighting adventure. And the final
chapter of this journey is that configuration element through CORSAIR iCUE
software. So you can basically enjoy endless configurations of lighting
effects for the strips and the fans choosing tasteful color matches with
whatever speed effects you might choose to make the machines feel alive or
simply have a color combo to reflect your mood and all this is done through
the CORSAIR iCUE software because anyone can create a personal RGB masterpiece.
Wow, now that reflects my color mood
perfectly CORSAIR lighting up your build for that gorgeous view. Alright so now I
hope you guys are aware of how to, you know, bring back a machine to life with
some RGB elements either through fans or LED strips using the LIGHTING NODE PRO
or the COMMANDER PRO from CORSAIR. Really awesome tools that make lighting
and creating that like personification, of illumination so awesome inside your
case. I’m Dimitri thanks so much for watching, we’ll see you
next video.

Elevate Your PC Lighting Game – RGB Done Right!
Tagged on:                                                                                     

100 thoughts on “Elevate Your PC Lighting Game – RGB Done Right!

  • January 1, 2019 at 11:44 am
    Permalink

    my node pro wont work with any software they're just stuck on rainbow
    it just doesn't recognize it's plugged in

    Reply
  • January 5, 2019 at 7:40 pm
    Permalink

    can corsair commander pro also illuminate tubes?

    Reply
  • January 7, 2019 at 7:01 am
    Permalink

    What happens if I don't have no usb connections on my board for the commander pro. Because the board i have is the Asus Maximum Formula IX and every time I try to connect the commander to it the software dosent pick up the devices. I appreciate any kind of help u can offer because I'm going crazy trying to figure this out.

    Reply
  • January 11, 2019 at 11:49 am
    Permalink

    icue is so unstable i had it on my pc and it kept it crashing , not the only one who has had those problems, since i stop using icue no more crashing , such a shame loved their keyboarda dn mice but their software ruined it for me

    Reply
  • January 12, 2019 at 8:54 pm
    Permalink

    are you greek

    Reply
  • January 15, 2019 at 6:50 pm
    Permalink

    Wait I can plug my AIO into the Commander Pro?

    Reply
  • January 22, 2019 at 11:57 pm
    Permalink

    Cant you just connect regular rgb light strips (using the same pin of course) into the node controller?

    Reply
  • January 23, 2019 at 1:15 am
    Permalink

    Geez, for the right price anyone sells out.

    Reply
  • January 26, 2019 at 6:35 am
    Permalink

    I'm glad he made this video, I was like – WTH are all these cables and controllers when I bust open my ML140 fan pack 🙂 Mystery solved after watching this video.

    Reply
  • January 29, 2019 at 9:25 am
    Permalink

    do you need to have the controller to use the fans at all, or can you configure them a bit without it?

    Reply
  • January 31, 2019 at 8:28 am
    Permalink

    I have the small hub and the lighting node pro, and I want to install the Commander pro so i need to take of the small hub? Because i want to control my rpm fans to no noise like the corsair h100i platinum performance tab can do

    Reply
  • February 9, 2019 at 6:28 pm
    Permalink

    will corsair rgb hub work on different rgb fan like deep cool cf 120? . i dont have rgb header in my motherboard i hope i could use the corsair software but with different rgb fan

    Reply
  • February 11, 2019 at 1:18 pm
    Permalink

    Is it possible for me to sync all Corsair RAM, AIO, LED strip and peripherals with Asus' AuraSync for the mobo and GPU?

    Reply
  • February 12, 2019 at 3:38 am
    Permalink

    I'm lost here. If I buy the CORSAIR Commander PRO, do I have everything I need to connect my two RGB Corsair fan? 2:48 how big is this thing it looks gigantic when you were holding it in your hands. Can you specify how many inches this thing is? Thank you any information would be greatly appreciated.

    I believe this the command pro been sold here
    https://www.newegg.com/Product/Product.aspx?item=N82E16811978004

    Reply
  • February 19, 2019 at 7:24 pm
    Permalink

    i need help!
    i bought a single rgb fans and the lightning hub, but no rgb hub…
    is there a way to get the fan to light up without me spending more cash?
    thank you<3

    Reply
  • February 21, 2019 at 6:44 pm
    Permalink

    Im looking to buy the Corsair Obsidian 1000D Super Tower Case with up to 20 fans. The Corsair Commander Pro that come with the case has only six inputs for my fans so is it possible to buy two more Corsair Commander Pro and link them together for all my fans so i can sync my RGB?

    Reply
  • February 28, 2019 at 5:26 am
    Permalink

    what if i want to use 7 fans? 3 for intake , 3 for radiator, and 1 for exhaust?

    Reply
  • February 28, 2019 at 1:49 pm
    Permalink

    Oof you used asus rog product

    Reply
  • March 1, 2019 at 3:49 am
    Permalink

    China is laughing its way all the way to the bank, they've convinced people that 2 dollar kit is worth hundreds and that pretty shiny colors are so cool. Nice marketing sellout Hardwarecanucks

    Reply
  • March 3, 2019 at 11:34 pm
    Permalink

    Hi there. Im having a problem I think with the commander pro. In Corsair Link, it doesnt see my fans! They apear 2 seconds, they dissapear, and when they apear one its at 12k rpm and second at 5.3k rpm. I cannot set them on high or low speed, they are mounted properly, ive followed many steps from more videos and im pretty aure they are mounted correctly. Does anyone had the same problem or know the solution please??

    Reply
  • March 4, 2019 at 8:47 pm
    Permalink

    Corsair? Sprach der Rabe: Nimmermehr!

    Reply
  • March 7, 2019 at 3:33 am
    Permalink

    So ive been looking around at what i would need to set up corsairs led strips and corsairs LL series fans, so if i get the commander pro i still need the fan hub and the lighting node pro? or can i just plug the fans into the commander and the led strips too? or do i need the fan hub but not the lighting node pro? If anyone could help me out thanks in advance!

    Reply
  • March 7, 2019 at 4:54 am
    Permalink

    What would I need for 9 rgb fans?

    Reply
  • March 9, 2019 at 11:38 pm
    Permalink

    I sometimes can't work out if he has a twin or it's just good video edits 😉

    Reply
  • March 10, 2019 at 6:15 pm
    Permalink

    Sucks for me cuz I'm an Aura boi…

    wait don't these connect to Aura?
    :DDDDDDDD

    Reply
  • March 13, 2019 at 9:12 pm
    Permalink

    I bought a 1000D, and I dont even want to build on it at the moment because I need 3 Corsair LED Hubs that dont come with the 1000D, and are currently sold out everywhere 16 fans and no where to connect my LED LL120s, I love Corsair always been my #1 gaming company, but the disappointment is real …

    Reply
  • March 18, 2019 at 9:22 am
    Permalink

    Where do i have to put the controlcalbe from the Case in ?

    Reply
  • March 27, 2019 at 6:53 pm
    Permalink

    and no mention in the description about his channel, or channel name….

    Reply
  • March 27, 2019 at 6:58 pm
    Permalink

    well this didn't help at all…. other RGB fans have that RGB white tip on the second cord….

    Reply
  • March 29, 2019 at 8:33 am
    Permalink

    thums up for a super sexy delivery

    Reply
  • March 29, 2019 at 8:36 am
    Permalink

    ARGB P*#n lol

    Reply
  • March 29, 2019 at 8:42 am
    Permalink

    there was even a bit were he flicks his hair aside lol

    Reply
  • March 29, 2019 at 11:13 pm
    Permalink

    Does it allow me to write a script to create my own effects?

    Reply
  • March 30, 2019 at 6:42 am
    Permalink

    How would you connect 12+ fans and 4 strips?

    Reply
  • March 31, 2019 at 9:16 pm
    Permalink

    I would really like these RGB fans a whole lot more if they were offered in a 200mm fan like the Thermaltake fans.

    Reply
  • April 4, 2019 at 3:10 pm
    Permalink

    Will it work with a asus motherboard

    Reply
  • April 9, 2019 at 3:35 pm
    Permalink

    But I can’t get Corsair h115i or the vengeance rgp pro to sync with mystic 🙁

    Reply
  • April 13, 2019 at 4:57 pm
    Permalink

    Corsair gives you everything(RGB lights, Fans, Pump, RAM, node to control all) to Bling Bling your PC 😛

    Reply
  • April 15, 2019 at 12:47 pm
    Permalink

    Corsair RGB is perfect but the sad thing is i live in europ so every thing here is expensif.

    Reply
  • April 16, 2019 at 9:49 am
    Permalink

    Thanks! This was really useful! I've already got my RGB keyboard hooked onto this (but cooler master RGB fans… which need replacing) so I'm going to go with corsair for my upgrade and the RGB strips. Thank you for making my choice easier!

    Reply
  • April 16, 2019 at 5:03 pm
    Permalink

    Can the commander pro and node pro be in the same system… i have the H80i and the commander pro plugged into my 2 usb header and the node plugged into my commander but the node does not show up
    HELP

    Reply
  • April 17, 2019 at 2:55 am
    Permalink

    Hey guys Corsair here with HardwareCanucks

    Reply
  • April 19, 2019 at 12:04 pm
    Permalink

    Bought Corsair 680x case and have 6 LL 120 fans connected to hub, ive checked and checked and everything is connected properly yet I can’t get the lighting to come on on the fans just fans spin. Please help.

    Reply
  • April 20, 2019 at 9:32 pm
    Permalink

    So can anyone answer me on this one.. If i buy a Obsidian 500D RGB Case that includes the commander PRO do i still need to buy the lightning node PRO or can i just pick up the corsair LINK lightstrips ? THANKS !

    Reply
  • April 21, 2019 at 4:23 pm
    Permalink

    RGB MAKES ME PUKE

    Reply
  • April 21, 2019 at 9:18 pm
    Permalink

    Is it usb

    Reply
  • April 26, 2019 at 8:09 am
    Permalink

    Do I need an rbg header on my motherboard

    Reply
  • April 28, 2019 at 2:07 pm
    Permalink

    Im a noob but imma build a pc soon and i have 6rgb fans, how do i connect them all together. im still confused as ididnt unsmderstand the vide completely.

    Reply
  • April 30, 2019 at 3:11 am
    Permalink

    what happens if you want to use more than 6 fans. what are your options then.

    Reply
  • May 14, 2019 at 8:30 pm
    Permalink

    I bought the Corsair 460x RGB case, and I want to switch out the SP fans that comes with the case, to some LL fans. So do I need this commander pro to control the lighting/effects, or can I just use the RGB fan controllers in the back, that also comes with the case?

    Reply
  • May 18, 2019 at 4:16 am
    Permalink

    do u have to have all three of the hubs or just the main 2?

    Reply
  • May 19, 2019 at 2:46 pm
    Permalink

    damn thats almost 300 bucks for rgb. but still looks amazing…one day, hopefully…one day

    Reply
  • May 19, 2019 at 4:31 pm
    Permalink

    the fan controller works only with Corsair fans I guess… or can I control any other fan with it?

    Reply
  • May 26, 2019 at 6:56 am
    Permalink

    I got one ML fan and i wanna run its rgb but i got it by itself and don't have a node, Do i just need the LED node or the RGB Fan LED Hub?

    Reply
  • May 31, 2019 at 9:34 pm
    Permalink

    Corsair stuff is always really well-designed. I've bought a bunch of RGB stuff from various companies, (Corsiar, NZXT, Thermaltake, ec) and I keep coming back to the Corsair lineup because it has the best software, best looks, and decent performance. I still have some NZXT stuff in my case, and I wish I'd gone corsair for the entire build.

    Reply
  • June 1, 2019 at 1:03 am
    Permalink

    Never trust a man with a hard drive hanging on the cables😄 great kits, thanks for the vid! But I did not quite get, how many individually controlled strips could me managed through it’s software?

    Reply
  • June 3, 2019 at 1:46 pm
    Permalink

    I bought this to run my noctua fans ;D

    Reply
  • June 13, 2019 at 9:12 am
    Permalink

    can you connect 9 fans, using one commander and 2 rgb splitters? or is that too much power?

    Reply
  • June 17, 2019 at 7:15 am
    Permalink

    So I have to buy all Corsair

    Reply
  • June 18, 2019 at 12:05 pm
    Permalink

    now release an updated commander pro version with 6 built-in fan LED channels so that it doesnt require an additional fan LED hub! as much as i like your products, your fan ecosystem is a total mess, because it requires too many devices and cables, instead of simply having an all-in-one solution. also instead of having 2 separate connectors + cables per fan, consider creating a propriety daisy-chain capable connector like in-win and lian-li. that would make things a lot easier!

    Reply
  • June 23, 2019 at 8:35 am
    Permalink

    Cool but I cant find many places to buy a Corsair RGB LED Fan Hub alone or a Corsair Lighting Node Pro alone

    Reply
  • June 25, 2019 at 12:04 am
    Permalink

    Star-lord lookin ass

    Reply
  • June 29, 2019 at 5:21 am
    Permalink

    Can you connect the h100i platinum cooler to the commander?

    Reply
  • June 30, 2019 at 12:24 pm
    Permalink

    i like Dmitry videos

    Reply
  • July 3, 2019 at 4:37 am
    Permalink

    If i get the Commander Pro i dont need the node pro or the fan hub anymore right?

    Reply
  • July 5, 2019 at 2:49 am
    Permalink

    can I use the corsair 4pin RGB hub to control EKWB components that have 4 pin cable controls?

    Reply
  • July 6, 2019 at 6:52 am
    Permalink

    Now I'm even more confused.. What should I buy if I want 2 RGB strips and 2 LL fans?

    Reply
  • July 8, 2019 at 1:41 am
    Permalink

    I clicked on thinking it was an instruction video on how to set up.

    Reply
  • July 9, 2019 at 4:47 am
    Permalink

    If I have four rgb fans and two normal fans from corsair, can I plug all of them into the commander pro for rpm control?

    Reply
  • July 11, 2019 at 2:15 am
    Permalink

    Oh good at least I bought the 2 correct controllers since I didn't buy a bundle or whatever that comes with one lol nice video

    Reply
  • July 12, 2019 at 7:11 am
    Permalink

    how many friggin controllers, boxes and wires, wires plugged into boxes plugged into fans plugged into rgb boxes, so simple and straight forward.

    Reply
  • July 14, 2019 at 11:54 pm
    Permalink

    Do i need a RGB-Header to Make the my PC RGB? Because i have a L1150-Intel. And these dont have a RGB Header

    Reply
  • July 20, 2019 at 8:31 pm
    Permalink

    still couldnt figure it out…. have the lightning pro, commander + the hub

    Reply
  • July 21, 2019 at 3:17 pm
    Permalink

    If i want to connect 4 led?(i mean on thr commander pro)

    Reply
  • July 27, 2019 at 12:57 am
    Permalink

    m planning to build a PC with 9 aRGB fans

    ID Cooling 12025 aRGB

    is it possible to daisi chain all 9 fans to the System Fan Header and aRgb Header on a Asus ROG B450 E mobo

    Reply
  • July 28, 2019 at 9:18 pm
    Permalink

    I can make argb without a 3pin header?

    Reply
  • July 29, 2019 at 9:02 pm
    Permalink

    why isn't the commander pro gigabyte RGB Fusion 2.0 capable?

    Reply
  • August 1, 2019 at 12:18 pm
    Permalink

    Does this only work with corsair's products?

    Reply
  • August 1, 2019 at 3:47 pm
    Permalink

    Is Corsair supplying their cases with the now standard 4 pin PWM case fans? The front I/O wiring loom connectors need + – labels on them for the Power LED and HDD LED orientation on the motherboard. USB C is now a standard with most motherboards and the front panel should have USB 3.0/3.1 and USB C ports. Some cases made by Corsair such as the 200R need updating as noted with the above items plus, as in the 200R, there is no option for solid side panels or the top of the case. The 200R is a very popular case yet, over the years it has fallen backwards due to the above plus, some folks do not now need radiator cooling and video card cooling on this case if they choose to use air CPU cooling and moderate discrete or Intel graphics. Where is the 200R by the way as you website has been saying out of stock for over one year now !

    Reply
  • August 3, 2019 at 5:44 pm
    Permalink

    So if im have corsair comander pro im don't need lightning node pro? Im dont understand help pls and how meney fans can conect

    Reply
  • August 10, 2019 at 2:52 am
    Permalink

    if you connect the usb can it be controlled by programs such as Asus aura?

    Reply
  • August 12, 2019 at 9:12 pm
    Permalink

    Can you make a tutorial on how to properly install rgb fans into your case? I don't quite get how all these cables have to be arranged together…

    Reply
  • August 14, 2019 at 10:58 pm
    Permalink

    Are there any 3rd party led strips that will work with the copro? I'm looking to get the copro but i also want to get rgb led strips that will sync up, but they only come with the lighting node pro or for a 40 dollar expansion kit to my knowledge (which is very overpriced!)

    Reply
  • August 17, 2019 at 3:58 am
    Permalink

    Well… if it keeps the children occupied and away from the adults machine, then I'm all for it.

    Reply
  • August 20, 2019 at 12:34 pm
    Permalink

    So im need both lightning node pro /comander pro or onley lightning node pro? And can i plug 6 fans into hub and get led light??????

    Reply
  • August 21, 2019 at 11:58 am
    Permalink

    Can you connect a thermaltake rgb power supply to a corsair controller.

    Reply
  • September 7, 2019 at 6:24 am
    Permalink

    Commander Pro is all I need – and then that tiny node thing is there. Why need both, Corsair?

    Reply
  • September 13, 2019 at 6:49 pm
    Permalink

    Too Bad iCue doesn't work on linux.

    Reply
  • September 18, 2019 at 10:12 am
    Permalink

    cheers this has inspired me

    Reply
  • September 25, 2019 at 9:06 pm
    Permalink

    Can’t control ram

    Edit: srry my bad u can

    Reply
  • September 29, 2019 at 5:24 pm
    Permalink

    Beautiful presentation

    Reply
  • September 30, 2019 at 10:21 pm
    Permalink

    I hate you Corsair, you have hurt me and I will never forgive you

    Reply
  • October 3, 2019 at 1:43 am
    Permalink

    Can i use that hub for another fan brand? Also

    Reply
  • October 11, 2019 at 10:46 am
    Permalink

    Where do I plug in the rgb hub from the ll 120 rgb because it doesn't fit in the commander pro

    Reply
  • October 20, 2019 at 8:22 am
    Permalink

    thanks finally got the video I wanted

    Reply
  • October 24, 2019 at 4:58 am
    Permalink

    So i don't need an RGB header from motherboard right?

    Reply
  • October 25, 2019 at 8:32 pm
    Permalink

    i just fell inlove this is exactly what i want to master the rgb

    Reply
  • October 29, 2019 at 10:25 pm
    Permalink

    Is anyone else annoyed by the fact that at 1:30 there is a houseplant on top of a functional and operational Computer…….which more then likely has air vents on the top of the case. not a good idea LOL

    Reply
  • November 4, 2019 at 11:35 pm
    Permalink

    Insane spending.

    Reply
  • November 7, 2019 at 5:17 am
    Permalink

    So will the commander pro be the only thing I need to power 4 LL120 RGB fans or will I need the rgb fan connector hub to power the LEDs as well?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *